My notebook




sys-unconfig – shell-скрипт для перенастройки системы во время следующей загрузки




sys-unconfig обеспечивает простой способ перенастройки системы под новую конфигурацию. При выполнении sys-unconfig остановит вашу систему и во время загрузки запустит следующие конфигурационные программы: passwd (для смены пароля root’а), netconfig, timeconfig, authconfig и ntsysv.


Наличие этого файла заставит /etc/rc.d/rc.sysinit запустить программы, указанные выше.

Vmware Windows 2012 R2 template configuration–Recommended


  • Floppy Drive Removed
  • Memory 4GB
  • Hard Disk 40 GB – Keeping it low is good as you cannot reduce thin provisioned disk size.

Make sure Hot Add is enabled

  • Enable Memory Hot Add for this Virtual Machine
  • Enable CPU Hot Add only for this Virtual Machine


  • Check and Upgrade Tools during Power Cycling


  • Check Enable Logging


Get to Boot Screen to do some configurations –


  • Boot-Time Diagnostic Screen to Enabled


Change Boot Order to  –

  • Hard Drive
  • Removable Devices
  • CD-ROM Drive
  • Network boot

Use + to Toggle or Shift ` +


Advanced –> I/O Device Configuration Serial Ports/Parallel Ports/Floppy Disabled.


  • Install VMware Tools


Disabled IPv6


Allow Remote Desktop –


  • Set Time to Display List of Operating Systems to 5 Seconds
  • Set Time to Display recovery Options when Needed to 5 Seconds


Change Machine Name –


Make sure Windows is up to date –

  • As .NET 4.6.1 is not supported for Some Applications like Exchange. Not Installing it at this point of time (Optional).


Open PowerShell Run as Administrator and Cleanup C:\Windows\WinSxS folder which contains all the Updates which is almost 8GB

Dism.exe /online /Cleanup-Image /StartComponentCleanup /ResetBase

This is a great command added with Windows 8.1 and Windows Server 2012 R2.  Essentially, it’s the mother of all commands. It cleanups and removes all the old superseded stuff from every component in the component store.


Change DVD ROM Drive Letter to Z: in Disk Management –


Control Panel – Notification Area Icons – Check Always Show All Icons and Notifications on the Taskbar


Power Options Set to High Performance


  • Proper Time Zone Updated in Server Manager
  • IE Enhance Security Configuration is set of OFF for Administrators only.


Start Run – Lusrmgr.msc – Local Administrator Account – Password Never Expires


Check – File Name Extensions

Windows Explorer – View –


Clear All Event Logs

Get-EventLog -List | foreach{Clear-EventLog -LogName $_.log}


  • Shutdown Windows 2012 R2 Template server

Windows Server 2012 Sysprep – %windir%\system32\sysprep

  • Convert to Template


Microsoft Recommendation –

  • Do not Disable User Access Control (UAC)
  • Do not Disable Windows Firewall


Deploy Virtual Machine From this Template –


Customization Specifications Manager to Join Domain Automatically –



Enter Local Administrator Password –


Network Settings



Enter Domain Information –


  • Check Generate New Security ID (SID)


  • Customize using an Existing customization Specification


Deploy Virtual Machine using Template –



Machine Joined Automatically –


Using PowerCLI – Import Multiple Virtual Machines using CSV

Original post.

How to upgrade PHP version 5.3.3 to 5.3.X


rpm -Uvh remi-release-6*.rpm epel-release-6*.rpm


yum upgrade --enablerepo=remi php


Original post.

Mysql backup

Create folder

mkdir /etc/scripts

edit backup files

databases=`mysql --user=$USER --password=$PASSWORD -e "SHOW DATABASES;" | tr -d "| " | grep -v Database`
for db in $databases; do
 if [[ "$db" != "information_schema" ]] && [[ "$db" != _* ]] ; then
 echo "Dumping database: $db"
 mysqldump --force --opt --user=$USER --password=$PASSWORD --databases $db > $OUTPUT/`date +%Y%m%d`.$db.sql
 gzip $OUTPUT/`date +%Y%m%d`.$db.sql

Delete old backups:

find /opt/backup_mysql/* -mtime +6 -exec rm {} \;

Change permission:

chmod 700
Add task
crontab -e
#delete old backups
0 2 * * * SHELL=/bin/sh PATH=/bin:/sbin:/usr/bin:/usr/sbin /etc/scripts/ > /dev/null 2>&1
#new backup
0 3 * * * SHELL=/bin/sh PATH=/bin:/sbin:/usr/bin:/usr/sbin /etc/scripts/ > /dev/null 2>&1

Setup IT Operational Portal Using iTop On CentOS/Debian


Using iTop you can:

– Document your entire IT infrastructure assets such as servers, applications, network devices, virtual machines, contacts.. etc.

– Manage incidents, user requests, planned outages.

– Document IT services and contracts with external providers including service level agreements.

– Export all the information in a manual or scripted manner.

– Import or synchronize/federate any data from external systems.


– Fully configurable CMDB.
– HelpDesk and Incident Management.
– Service and Contract Management.
– Change Management.
– Configuration Management.
– Automatic SLA management.
– Automatic impact analysis.
– CSV import tool for all data.
– Consistency audit to check data quality.
– Data synchronization (data federation).

In this tutorial let us see how to setup the iTop on CentOS 6.5 and Debian 7, although it should work on RHEL, Scientific Linux 6.x and Ubuntu 13.10 as well.


As it relies on apache, mysql and php, we need a server that has a working LAMP stack. To install LAMP server, refer the following articles that matches your platform.

Install LAMP server on CentOS/RHEL/Scientific Linux 6

Install LAMP server on Debian 7

Install LAMP server on Ubuntu 13.10

Then install the following php extensions.

On CentOS/RHEL/Scientific Linux:

# yum install php-mysql php-mcrypt php-xml php-cli php-soap php-ldap graphviz

On Debian/Ubuntu:

apt-get install php5-mysql php5-ldap php5-mcrypt
apt-get install php5-cli php5-soap php5-json graphviz

We need to adjust the following php settings for best performance. Edit file /etc/php.ini,

# vi /etc/php.ini

Set post_max_size as 32M.

post_max_size = 32M

Download iTap

You can download the latest version from here.

 # wget

Extract the zip file with command:

# unzip

The above command extracts the zip file as a folder called ‘web’ in your current directory. Copy the ‘web’ folder contents to apache root folder.

# cp -fr web/ /var/www/html/itop

If you’re on a Debian/Ubuntu system, then the command would be:

# cp -fr web/ /var/www/itop

Create the following folders and make them to be writable.

# mkdir /var/www/html/itop/conf
# mkdir /var/www/html/itop/data
# mkdir /var/www/html/itop/env-production
# mkdir /var/www/html/itop/log
# chmod 777 /var/www/html/itop/conf/
# chmod 777 /var/www/html/itop/data
# chmod 777 /var/www/html/itop/env-production/
# chmod 777 /var/www/html/itop/log

Begin Installation

Let us start the installation by navigating to the URL http://ip-address/itop orhttp://domain-name/itop.

If everything Ok, you will see the following screen. Click Continue.

Welcome to iTop version 2.0.2 - Mozilla Firefox_001Select Install a New iTop and click Next.

Install or Upgrade choice - Mozilla Firefox_002Accept the License agreement.

License Agreement - Mozilla Firefox_003Create a new database for iTop.

Database Configuration - Mozilla Firefox_005Enter the password for admin account.

Administrator Account - Mozilla Firefox_006We’ve reached the end of installation. You’ll be asked to populate some sample data’s into your data. If you directly use it in production environment, then select the second option and Click Next. I want to populate my database with some demo data’s, so checked the first option.

Miscellaneous Parameters - Mozilla Firefox_008Click Next.

Configuration Management options - Mozilla Firefox_010Select the best choice of your IT environment and click Next.

Service Management options - Mozilla Firefox_012Select the type of your Ticket management. If you don’t like to have Ticket management system, you can skip it also.

Tickets Management options - Mozilla Firefox_013Select the type of tickets you want to use in order to manage changes to the IT infrastructure.

Change Management options - Mozilla Firefox_015Select the following options if you want to implement any additional ITIL processes.

Additional ITIL tickets - Mozilla Firefox_016Once you done with configuration, click Install.

Ready to install - Mozilla Firefox_018Congratulations! We’ve successfully installed iTop. Click on the Link Enter iTop to log in.

Done - Mozilla Firefox_019This is how my Dashboard looks with demo data.

Welcome to iTop - Mozilla Firefox_020That’s all now. Start learning iTop with demo data and manage your IT infrastructure like a boss.

Reference Links:

iTop Homepage


Original post – Link

Install LAMP Server (Apache, MySQL, PHP) On RHEL, CentOS, Scientific Linux 6.5/6.4

LAMP is a combination of operating system and open-source software stack. The acronym LAMP is derived from first letters of Linux, Apache HTTP Server, MySQL database, and PHP/Perl/Python.

In this tutorial let us see how to setup LAMP server on RHEL/CentOS/Scientific Linux 6.x. Here x stands for version such as 6.1, 6.2, 6.3, 6.4, 6.5 etc.

My testbox hostname and IP address are server.unixmen.local and, respectively.

Install Apache

Apache is an open-source multi-platform web server. It provides a full range of web server features including CGI, SSL and virtual domains.

To install Apache, enter the following command from your terminal:

# yum install httpd -y

Start the Apache service and let it to start automatically on every reboot:

# service httpd start
# chkconfig httpd on

Allow Apache server default port 80 through your firewall/router if you want to connect from remote systems. To do that, edit file /etc/sysconfig/iptables,

# vi /etc/sysconfig/iptables

Add the following lines.

-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEP

Restart iptables:

# service iptables restart

Test Apache:

Open your web browser and navigate to http://localhost/ or http://server-ip-address/.

Apache HTTP Server Test Page powered by CentOS - Mozilla Firefox_001

Install MySQL

MySQL is an enterprise class, open source, world’s second most used database. MySQL is a popular choice of database for use in web applications, and is a central component of the widely used LAMP open source web application software stack.

To install MySQL, enter the following command:

# yum install mysql mysql-server -y

Start the MySQL service and make to start automatically on every reboot.

# service mysqld start
# chkconfig mysqld on

Setup MySQL root password

By default, mysql root user doesn’t has password. To secure mysql, we have to setup mysql root user password.

# mysql_secure_installation
In order to log into MySQL to secure it, we'll need the current
password for the root user.  If you've just installed MySQL, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.

Enter current password for root (enter for none):     ## Press Enter ## 
OK, successfully used password, moving on...
Setting the root password ensures that nobody can log into the MySQL
root user without the proper authorisation.

Set root password? [Y/n]     ## Press Enter ##
New password:                ## Enter new password ##
Re-enter new password:       ## Re-enter new password ##
Password updated successfully!
Reloading privilege tables..
 ... Success!

By default, a MySQL installation has an anonymous user, allowing anyone
to log into MySQL without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n]     ## Press Enter ##
 ... Success!

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n]     ## Press Enter ## 
... Success!
By default, MySQL comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n]     ## Press Enter ##
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!
Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n]     ## Press Enter ##
 ... Success!

Cleaning up...

All done!  If you've completed all of the above steps, your MySQL
installation should now be secure.

Thanks for using MySQL!

Install PHP

PHP (recursive acronym for PHP: Hypertext Preprocessor) is a widely used open-source general purpose scripting language that is especially suited for web development and can be embedded into HTML.

Install PHP with following command:

# yum install php -y

Test PHP

Create a sample “testphp.php” file in Apache document root folder and append the lines as shown below:

# vi /var/www/html/testphp.php

Add the following lines.

Restart httpd service:

# service httpd restart

Navigate to http://server-ip-address/testphp.php. It will display all the details about php such as version, build date and commands etc.

If you wanna to get MySQL support in your PHP, you should install “php-mysql” package. If you want to install all php modules just you use the command “yum install php*”

[root@server ~]# yum install php-mysql -y

Now open the phptest.php file in your browser using http://ip-address/testphp.php or http://domain-name/testphp.php. Scroll down and you will see the mysql module will be presented there.

phpinfo() - Mozilla Firefox_002Install phpMyAdmin

phpMyAdmin is a free open source web interface tool, used to manage your MySQL databases. By default phpMyAdmin is not found in CentOS official repositories. So let us install it using EPEL repository.

To install EPEL repository, follow the below link:

Install EPEL Repository On RHEL/CentOS/Scientific Linux 6

Now install phpMyAdmin

# yum install phpmyadmin -y

Configure phpMyAdmin

Edit the phpmyadmin.conf file.

# vi /etc/httpd/conf.d/phpMyAdmin.conf

Find and comment the whole /<Directory> section as shown below:

Alias /phpMyAdmin /usr/share/phpMyAdmin
Alias /phpmyadmin /usr/share/phpMyAdmin

#<Directory /usr/share/phpMyAdmin/>
#   <IfModule mod_authz_core.c>
#     # Apache 2.4
#     Require local
#   </IfModule>
#   <IfModule !mod_authz_core.c>
#     # Apache 2.2
#     Order Deny,Allow
#     Deny from All
#     Allow from
#     Allow from ::1
#   </IfModule>

Open “” file and change from “cookie” to “http” to change the authentication in phpMyAdmin:

# cp /usr/share/phpMyAdmin/ /usr/share/phpMyAdmin/ 
# vi /usr/share/phpMyAdmin/

Change cookie to http.

/* Authentication type */
$cfg['Servers'][$i]['auth_type'] = 'http';

Restart the Apache service:

# service httpd restart

Now you can access the phpmyadmin console by navigating to http://server-ip-address/phpmyadmin/ from your browser.

Enter your MySQL username and password which you have given in previous steps. In my case its “root” and “centos”.

phpMyAdmin - Mozilla Firefox_003Now you will be redirected to the phpmyadmin as shown below. - localhost | phpMyAdmin 4.1.2 - Mozilla Firefox_004

Now you will able to manage your MariaDB databases from phpMyAdmin web interface.

That’s it. Your LAMP server is up and ready to use.

Original post – link

IBM IMM (Integrated Management Module) Defult Username and Password

Default login credentials for IBM IMM (Integrated Management Module) are as follows:


  • Username: USERID
  • Password: PASSW0RD

Both username and a password are case sensitive so they have to be in block capitals. Please notice there is a zero ‘0’ in the word PASSWORD instead of letter ‘O’.



Add a User and Grant Root Privileges on CentOS 6.5

Step 1: Add the User

adduser mynewuser

Set the password for the new user:

passwd mynewuser

Step 2: Grant Root Privileges to the User


Find the following code:

## Allow root to run any commands anywhere
root ALL=(ALL) ALL

mynewuser ALL=(ALL) ALL

Save the file with the command :wq .

Installing text mode setup tool

yum install setuptool system-config-securitylevel-tui authconfig system-config-network-tui ntsysv


setuptool : text setup tool console
system-config-securitylevel-tui : for configuring the firewall
authconfig : for configuring authentication
system-config-network-tui : for configuring the network
ntsysv : for configuring the system services


Blog at

Up ↑